[REQ_ERR: OPERATION_TIMEDOUT] [KTrafficClient] Something is wrong. Enable debug mode to see the reason.
Fujiiryoki’s electrolytic hydrogen water generator HWP-55 can generate purified water, acidic water, and sanitized water in addition to electrolytic hydrogen water. Various types of water can be used depending on the purpose.
Poduct No. | HWP-55 | |
Rated | AC220V 50-60Hz 1.5A | |
Water supply method | Discharge water tap corporation stop | |
Water supply connection | Lever selection | |
Structure | Water purifier (FW-13CM) main body built-in type | |
Power consumption | About 250W (Standby:About 0.4W) | |
Main body | Mass | About 5.7kg(When filled with water: About 6.6kg) |
Dimensions | 255mm (width) x120mm (depth) x347mm (height) | |
Operable water temperature for passing water in main body | Lower than 35ºC (Corporation stop, Lower than 60ºC) | |
Operable water pressure (dynamic water pressure) for passing water in main body | 70kPa~500kPa | |
Operable water pipe pressure (hydrostatic pressure) | 70kPa~500kPa | |
Electrolysis generation water amount | Rated water amount | 2.8L/min. (Water pressure 100kPa, when 20ºC) |
Discharge port water amount | 2.65L/min. (Water pressure 100kPa, when 20ºC) | |
Drainage port water amount | 0.15L/min. (Water pressure 100kPa | |
Continuously operable time |
Alkaline ionized water: About 10 minutes (Note 1) Acidic water: About 5 minutes (Note 1) Strong alkaline ionized water: About 5 minutes (Note 1) Sanitized water: Max. 5 minutes (when 15g of salt is put in) |
|
Filtering capacity |
Filtering flow rate | 2.5L/min |
Free residual chlorine | 16,000L (Note 2) | |
Turbidity | 16,000L (Note 3) | |
Total trihalomethane | 6,500L (Note 2) | |
Soluble lead | 7,500L (Note 2) | |
CAT (Agricultural chemicals) | 10,000L (Note 2) | |
2-MIB (mold odor) | 5,500L (Note 2) | |
Tetrachloroethylene | 16,000L (Note 2) | |
Trichloroethylene | 16,000L (Note 2) | |
1, 1, 1- tricloroethane | 5,500L (Note 2) | |
Chloroform | 5,500L (Note 2) | |
Bromodichloromethane | 15,000L (Note 2) | |
Dibromochloromethane | 16,000L (Note 2) | |
Bromoform | 16,000L (Note 2) | |
Rough standard for replacement when 16,000L is set as life |
FW-02C/Fw-11M: About 1 year (if 40L is used in a day) (Note 4) About 2 year (if 20L is used in a day) |
|
Length of power cord | 2.5m | |
Power protection unit | Fuse (2A) |
Alkaline Hydrogen Water of three levels + Strong Alkaline Hydrogen Water at one level, acidic water at one level, sanitized water at one level
For Alkaline Hydrogen Water 1, 2, or 3 with dynamic water pressure at 100 kPa:
Delivery water amount/electrolytic hydrogen water: Approx. 2.65 L/minute
Volume of wastewater/acidic water: Approx. 0.15 L/minute
For Alkaline Hydrogen Water 1, 2, or 3 with dynamic water pressure a 350 kPa:
Delivery water amount/electrolytic hydrogen water: Approx. 5.5 L/minute
Volume of wastewater/acidic water: Approx. 0.29 L/minute
Hollow fiber membrane, silver-added granular activated charcoal, fibrous activated charcoal, etc.
13 substances as specified by the JIS standard, including the following, are eliminated.
Free residual chlorine: Approx. 16,000 L*1
Turbidity: Approx. 16,000 L*2
Total trihalomethane: Approx. 6,500 L*1
*1 Value of an 80% removal rate via the testing methods for household water purifiers (JIS S3201)
*2 Value of a 50% filtering flow volume via the testing methods for household water purifiers (JIS S3201)
If free residual chlorine and turbidity are targeted: Approx. 2 years*3
If total trihalomethane is targeted: Approx. 10 months*3
*3 Assuming that 20 L of water is used per day
[Enclosed accessories]